Acquiring a permit for a new deck or porch requires submittal of a completed application for a residential building permit using the Wake County Permit Portal, a site plan containing the items listed below under Site Plan Requirements (see a Site Plan Example here) and building plans with the information listed below under deck and porch plan requirements. If the property is served by an onsite wastewater system (septic) the location of the new footprint of the deck or porch must be checked to ensure that the location of the structure does not impact and maintains the required setbacks from the current wastewater system, its repair area and any on-site wells.

A field consultation fee and a site visit by Environmental Services staff may be required for these services. The process will begin along with the application for the building permit.                            

View our Permit Portal Guide Page


To permit a new deck or porch you will need to submit:

·       A completed application using the Wake County Permit Portal. You will be required to first set up an account using an email address and password. You will be sent a confirmation email from the Permit Portal with a link to verify your email address. When this step is completed you are now ready to apply for your building permit. 
 
·       A site plan meeting all of the specifications listed below in Site Plan Requirements. See a Site Plan Example. Site plans are required for decks and porches where the footprint of the existing structure will change.
 
·       Building plans detailing the work to be performed. The building plans shall detail the construction in accordance with the deck and porch plan requirements listed below as it applies to the particular project.
 
·       A certificate of workers' compensation insurance or a completed affidavit of workers compensation exemption form for contractors.
 
·       A completed and notarized affidavit owner contractor form for any project over $30,000 where an owner is listed as the general contractor.
 
·       An Appointment of Lien Agent where the project cost is $30,000 or more. Website: Liens NC
Plans will be reviewed in the order they are received by the Plan Review staff. The permit will be issued when all outstanding issues are completed, and the applicable permit fees shall be paid at that time. 

Site Plan Requirements:

A preliminary site plan is required before permits are issued. A final (as-built) site plan may be required prior to the issuance of a Certificate of Occupancy. A good resource for a site plan is a survey issued for a recent mortgage or refinance closing. See a Site Plan Example
 
A site plan includes the entire lot, drawn to scale, with the following:
·        Lot lines with dimensions and road frontage shown.
·        All existing and proposed buildings and structures with overall dimensions and, for proposed buildings and structures, the distance measured from the nearest fixed reference points (such as property lines, lot corners, existing building/structures, etc) that can be used to precisely locate the proposed building/structures should be clearly shown.
·        Existing and proposed driveways, parking spaces, patios, pool decking, and walkways with width and surface material identified.
·        Where known, existing or proposed well, septic tank and drain field location(s) or sewer and water easements and proposed connection location(s).
·        All water features including ditches, easements, buffers, and flood hazard areas (FEMA or Flood prone soils).
·        The location, type and relevant dimensions and capacities of storm water management structures, associated easements and other devices.
·        All existing and proposed impervious surfaces clearly itemized and listed in square feet and as a percentage of the net lot size. This can be shown on the site plan or an attached impervious calculation worksheet. Access the Impervious Surfaces Calculation Worksheet
·        Parcel identification number (PIN), address of property, north arrow, scale of the site plan, bar scale, and date map prepared (and any revision dates). 
·        If parcel is less than 5 acres, scales of 1" = 20', 30', 40', 50', 60' or 100' are acceptable on paper no larger than 11" x 17".
·        For a parcel of 5 acres or more, scales of 1” = 100’, 200’, 300’, 400’ or 500’ are acceptable in addition to the scales listed above and may be on any size paper.  If the paper is larger than 11” x 17”, or the scale is smaller than 1”=100’, an inset or separate sheet must also be provided showing the proposed construction at a scale of 1” = 20’, 30’, 40’, 50’, 60’ or 100’.
·        As-built surveys must be labeled as such, be completed by a Professional Land Surveyor and include all the above.  The date the as-built is prepared must be on or after the initial building final.
Further information regarding requirements of the Storm water Programs may be obtained from Wake County Environmental Services at 919-856-7400. 
**These are minimum requirements.  Special circumstances or small lots may necessitate further requirements**
 

Residential Plan Submittal Requirements:

All plans are required to be designed to meet the 2018 North Carolina Residential Code. Appendix M of the North Carolina Residential Code address the requirements for decks, including decks supporting porches. To access the code online, please click on this link: Appendix M of the North Carolina Residential Code

Please draw deck plans with a top view looking down. Elevation deck plans are optional but encouraged. Deck plans can be hand drawn. Please be neat and legible.

This is a minimum plan review checklist, additional information may be added by the applicant or requested in the field to determine compliance. Permit holders remain responsible for meeting all code requirements regardless if a review item or not. This minimum review checklist is intended to help prevent any major non-compliance issues from being built in the field which typically results in significant cost and delays on a project.

Decks

  • Dimensions- outside dimensions, spans between supports posts and footings.
  • Tallest height of deck floor from finished grade.
  • Footing sizes- width, depth and locations. Footings are required to be a minimum of 12” into the soil.
  • Posts sizes.
  • Girder sizes, number of members and spans between supports.
  • Floor joist direction, size, on-center spacing and spans.
  • List either 2x2 ledgers or joist hangers for floor joist attachment to girders or bands.
  • Guardrail details, if required. Guardrails (36” tall) are required for deck floors more than 30” above grade.
  • Bracing details for free standing decks and decks attached to structures with a floor height 4’ or taller
  • Deck to house band attachment details.
  • Show cantilevers with spans from support.
  • Engineer stamped plans are required for 2 story decks and decks supporting hot tubs and spas.

Porches

  • Porch plans are required to be drawn with a top view looking down and elevations for clarity.
  • Dimensions- outside dimensions, spans between supports posts and footings
  • Posts sizes.
  • Header size, number of members and spans between posts.
  • Ceiling joist direction, size, on-center spacing and spans.
  • Roof rafter direction, size, on-center spacing and spans
  • Ridge size. If installing a vaulted ceiling, where ceiling joist or rafter ties are not installed, an engineer letter is required to size the structural ridge and how it will be supported.
  • Band attachment to house for a shed roof.